Table of Contents
Advertisement
Certification
6.1.3 FCC
•
•
The device is marked with the CE symbol and can be used throughout the European
community.
A copy of the CE Declaration of Conformity is available from Siemens Canada Ltd..
For contact information, refer to
6.1.3
FCC
This device has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This device generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to
correct the interference at their own expense.
IMPORTANT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.
6.1.4
ISO
This device was designed and manufactured using a certified ISO (International
Organization for Standardization) quality program that adheres to the following
standard:
•
26
EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
EN 55022
Information Technology Equipment – Radio disturbance characteristics – Limits
and methods of measurement
ISO 9001:2015
Quality management systems – Requirements
"Contacting Siemens (Page
vii)".
RUGGEDCOM RS8000
Installation Manual, 12/2021, C79000-G8976-1020-06
Advertisement
Table of Contents
