Siemens Portable Radio Installation Manual page 38

IEEE 1613 (C37.90.x) EMC Immunity Type Tests
Note
RUGGEDCOM products meet Class 1 requirements for copper Ethernet
configurations and Class 2 for fiber Ethernet configurations. Class 1 allows for
temporary communication loss, while Class 2 requires error-free and interrupted
communications.
IEEE Test
C37.90.3
C37.90.2
C37.90.1
C37.90
Environmental Type Tests
IEC 60068-2-1
RUGGEDCOM RS8000
Installation Manual, 12/2021, C79000-G8976-1020-06
Test
HV Impulse
IEEE 1613
Clause
9
8
7
6
Test
Cold Temperature
6.2 EMC and Environmental Type Tests
Description
AC Power
ports
Signal ports
DC Power
ports
AC Power
ports
Description
ESD Enclosure Contact
Enclosure Air
Radiated RFI Enclosure ports
Fast Signal ports
Transient
DC Power ports
AC Power ports
Earth ground ports
Oscillatory Signal ports
DC Power ports
AC Power ports
HV Impulse Signal ports
DC Power ports
AC Power ports
Dielectric Signal ports
Strength
DC Power ports
AC Power ports
Description
Test Ad
Certification
Test Levels
2 kVDC
5 kV (Fail-Safe
Relay Output)
5 kV
5 kV
Test Levels
±8 kV
±15 kV
35 V/m
±4 kV @ 2.5 kHz
±4 kV
±4 kV
±4 kV
2.5 kV common
mode @ 1MHz
2.5 kV common and
differential mode @ 1MHz
2.5 kV common and
differential mode @ 1MHz
5 kV (Failsafe Relay)
5 kV
5 kV
2 kVAC (Failsafe Relay)
1.5 kVDC
2 kVAC
Test Levels Severity Levels
-40 °C (-40
°F), 16 Hours
Severity
Levels
29