Table of Contents
Advertisement
5. Choose "The updated driver (Recommended)", and click on
"Next" then "Next" again.
6. Click on "Finish" for the driver to take effect.
7. Driver installation complete. Please proceed to Section 8 for
device connection procedures.
7. W
2000 D
INDOWS
Follow the procedures below to install the Windows 2000 driver:
1. When Windows boots up, a dialog box New Hardware Found will
appear as:
Texas Instrument OHCI Compliant IEEE 1394 Host Controller
2. click "Next".
3. Choose "Select for the best driver for your devices", and click on
"Next".
4. Insert the Windows 2000 CD-ROM and check the "CD-ROM"
option then click on "Next".
5. Choose "The updated driver (Recommended)", and click on
"Next" then "Next" again.
6. Click on "Finish" for the driver to take effect.
7. Driver installation complete. Please proceed to Section 8 for
device connection procedures.
I
RIVER
NSTALLATION
OHCI Compliant IEEE 1394 Host Controller
Or
- 6 -
Advertisement
Table of Contents
