Device Connection; 8.1 Connecting Dv Camcorder; Connecting Other Device - Canon IEEE 1394 User Manual

8. D C
EVICE ONNECTION
The following section provides information on connecting devices to
the 1394 CardBus adapter.

8.1 Connecting DV Camcorder

Before setting up the digital video camcorder, make sure to verify
the driver for the CardBus PC card has been successfully installed
into your system and follow the setup procedures listed below.
1. Boot up your system to Windows OS
2. Connect the 4-pin connector into the digital camcorder, then power-on the
camcorder. The camcorder should be recognized by the system
once the power is on.
3.The setup procedure is now complete.
To verify successful device setup:
1. From the main desktop, double-click on My Computer, Control
Panel, System, Device Manager.
2. Double-click on Imaging Device option. "Microsoft DV Camera
and VCR" should be displayed when the device is successfully
setup.
8.2 Connecting Other Devices
Most of the 1394 devices are supported by Windows 98 (Second
Edition). Please refer to the device's user manual for detail
installation information.
- 7 -