Advertisement
Quick Links
Advertisement
Related Manuals for Canon PZ-E2
Summary of Contents for Canon PZ-E2
- Page 1 Instructions...
- Page 2 Thank you for purchasing a Canon product. The Canon Power Zoom Adapter PZ-E2, Camera Firmware and PZ-E2B is an accessory that allows servo Camera Applications zoom (powered zooming) when attached to a lens for EOS R series cameras*. Please use the latest versions of firmware and applications * For EOS R series camera lenses supported for this with the camera in use.
-
Page 3: Safety Precautions
Safety Precautions Precautions to ensure that the camera is used Details pertaining to risks that may Caution safely. Read these precautions thoroughly. Make result in injury or damage to other objects. sure all details are observed in order to prevent risks and injury to the user and other people. -
Page 4: General Precautions
General Precautions Handling Precautions Do not leave the product in excessive heat such as in a car in direct sunlight. High temperatures can cause the product to malfunction. If the product is taken from a cold environment into a warm one, condensation may develop on the product surface and internal parts. - Page 5 This device complies with Part 15 of the FCC Rules. CAN ICES-3(B)/NMB-3(B) Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions.
- Page 6 Nomenclature (PZ-E2) Positioning pins (→ 7) Mounting screws (→ 7) Contacts (→ 7) Zoom operation switch (→ 9) Gear (→ 7) Mounting screws (→ 7) Digital terminal (→ 11) Zoom mode switch (→ 8) Zoom speed adjustment dial (→ 8, 9) For detailed information, reference page numbers are provided in parentheses (→...
- Page 7 Nomenclature (PZ-E2B) Positioning pins (→ 7) Mounting screws (→ 7) Contacts (→ 7) Zoom operation switch (→ 9) Gear (→ 7) Digital terminal (→ 11) Mounting screws (→ 7) Zoom/Focus remote connector (→ 12) Zoom mode switch (→ 8) Zoom speed adjustment dial (→ 8, 9) For detailed information, reference page numbers are provided in parentheses (→...
- Page 8 1. Attaching and Removing Adapter ❶ ❷ ❸ Attaching Removing Line up the positioning pins at the power Hold the adapter firmly and turn the mounting zoom adapter attachment holes on the lens screws in the direction of the arrow with a and hold it against the lens.
- Page 9 3. Setting Zoom Speed 2. Setting Zoom Mode Use the zoom speed adjustment dial to set the The zoom mode switch can be set to either speed of the servo zoom. servo zoom [SERVO] or manual zoom To raise the zoom speed, turn the dial in [MANU].
- Page 10 4. Using Servo Zoom Use the zoom operation switch to use the servo zoom. Pressing [W] will zoom the lens out (wide angle) and pressing [T] will zoom the lens in (telephoto). You can use servo zooms by remote control when using this adapter. Refer to “Materials” on Page 14 for details of remote control.
- Page 11 5. Thumb rest For hand-held shooting, attach the thumb rest to the lens to avoid touching the zoom ring of the lens during servo zooming. Lens holder/thumb rest attachment holes Thumb rest Attaching the thumb rest Use the hex key to attach the thumb rest to the lens holder/thumb rest attachment holes on the lens.
- Page 12 6. USB Power Adapter PD-E1 (Sold separately) The USB Power Adapter PD-E1 (sold separately) can be used to supply power, reducing the power supplied by the camera and increasing the maximum zoom speed*. * For some cameras**, the maximum zoom speed is increased, regardless of whether the USB power adapter is connected or not.
- Page 13 7. Zoom/Focus Remote Connector (PZ-E2B only) PZ-E2B is equipped with a zoom/focus remote connector which can connect Canon zoom servo grip, zoom demand and focus demand. Zoom/Focus Remote Connector Operation with Zoom Servo Grip/Zoom Operation with Focus Demand Demand By connecting focus demand, focus operation By connecting the zoom servo grip/zoom from the focus demand is possible.
- Page 14 Zoom/Focus Remote Connector (PZ-E2B only) Canon Zoom Servo Grip ZSG-C10 can be connected. Canon Zoom Demand ZSD-300D can be connected. Shtl/Memo/RET switches become ineffective. Frame switch functions as one-shot AF (auto focus) switch. When zoom demand is connected, the zoom speed adjustment dial is not operational.
- Page 15 Connect smartphone app or the EOS Utility software that comes with the camera to operate the servo zoom. The zoom mode switch should be set to servo zoom [SERVO]. For details, refer to the EOS Utility software instruction manual or the Canon website. ENG-14...
-
Page 16: Specifications
PZ-E2: Approx. 155g / 5.5 oz Weight (body only) PZ-E2B: Approx. 165g / 5.8 oz Accessories Soft case, Thumb rest, Hex key All data listed is measured according to Canon standards. Product specifications and appearance are subject to change without notice. ENG-15... - Page 17 CT1-D324-A 1023SZ © CANON INC. 2023...