Connecting A Smartphone - Yamaha RM-CR Reference Manual

Connecting a smartphone

Prepare the following.
• Smartphone
IMPORTANT: • Bluetooth must first be enabled in the Web GUI. For details, refer to page 26.
• This unit cannot be connected with multiple smartphones at the same time via Bluetooth.
[Connecting for the first time]
1.
Long-press the Bluetooth button on the front panel of the unit for four seconds or more.
The unit enters the pairing standby mode, and the Bluetooth indicator flashes blue quickly.
NOTE: Pairing means that the unit and the smartphone register each other with the information required for a Bluetooth
connection.
2.
Enable Bluetooth on the smartphone, and select [Yamaha RM-CR-XXXXXX] (where "XXXXXX" is the MAC
address of this unit).
The connection is completed as soon as pairing is finished. Check the completion of the connection from the screen of the
smartphone.
IMPORTANT: As a factory default, the passkey is set to "0000" (numbers). The passkey can be changed in the Web GUI.
NOTE: • If 60 seconds have elapsed without completing pairing, the pairing standby mode of this unit will be canceled.
• To cancel the pairing standby mode, press the Bluetooth button while the Bluetooth indicator is flashing.
• This unit can be paired with up to eight smartphones. When pairing with the ninth device has completed, the pairing
with the oldest date and time of the nine smartphones will be canceled.
Yamaha RM-CR-xxxxxx
RM-CR Reference Manual
16