Table of Contents
Advertisement
Foreword
Thank you for purchasing the Yamaha SP2060 Speaker Processor.
In order to take full advantage of the features and performance provided by the SP2060, we urge you to read this owner's manual
thoroughly before connecting or using the unit. Keep this manual in a safe place for future reference.
Accessories (Please make
sure the following items are
included in the package.)
• SP2060 Owner's Manual (this document)
• AC power cord
• Rubber feet x 4
About the Firmware Version
You can check the firmware version of your SP2060 in the
UTILITY display (see page 28).
You can also download the latest firmware from the follow-
ing Yamaha website.
http://www.yamahaproaudio.com/
About DME Designer
DME Designer software enables you to control the SP2060
or DME series system from a connected computer.
The DME Designer version 2.0 or later features this func-
tion.
You can download DME Designer from the following
Yamaha website.
http://www.yamahaproaudio.com/
Precautions for Using a
Rack-mounted SP2060
If you install the SP2060 along with other SP2060 units or
other devices in a poorly ventilated rack, the ambient tem-
perature inside the rack may rise, resulting in inefficient per-
formance. Be sure to install the SP2060 in a well-ventilated
rack and make sure that the heat will be ventilated efficiently.
If the temperature inside the rack is expected to rise above 40
degrees Celsius or 104 degrees Fahrenheit (or if the ambient
temperature outside the rack is expected to rise above 30 de-
grees Celsius or 86 Fahrenheit), install a fan kit in the top
row of the rack. The fan must provide airflow of 1.6m
or more and static pressure of 5mmH
Fan kit
SP2060
SP2060
3
/min
O or more.
2
Preparation
Connecting the AC power cord
Be sure to turn all devices OFF before connecting AC
mains power.
CAUTION
First plug the female-connector end of the AC cord into the
[AC IN] socket on the rear panel of the SP2060, then plug
the male plug into an appropriate AC mains outlet. Be sure
to use the voltage specified for the device. The required volt-
age is printed on the name plate of the device.
Turning the power on and off
To prevent the initial power-on surge from generating a
large noise spike or damaging your speaker system, turn
devices on in the following order: audio sources, mixer
(such as M7CL), SP2060, and finally power amplifiers.
CAUTION
Reverse this order when turning power off.
1.
Press the [POWER] switch to turn the power
on to the SP2060.
The SP2060 displays a message.
SpeakerProcessor
SP2060
2.
Press the [POWER] switch again to turn off
the power.
NOT E
The SP2060 remembers the scene settings when you turn off the
power. When you turn on the power to the SP2060, it will start
up with the same scene settings.
You can also set up the SP2060 so that at the startup it will recall
the scene selected before you turned off the power to the device
(See page 33).
Do NOT turn off the power to the SP2060 while the unit
is displaying the message "DO NOT TURN OFF!" at the
bottom of the display, for example, while it is storing the
scene.
CAUTION
Otherwise, a malfunction may occur.
SP2060 Owner's Manual
7
Advertisement
Table of Contents
