Yamaha RM-CR Reference Manual page 53

Display
Automatic audio tuning failed,
because of measurement
environment too noisy.
Automatic audio tuning failed,
because of audio input from
peripheral Dante mic undetected.
Automatic audio tuning failed,
because of no peripheral Dante
mic registered.
Automatic audio tuning failed,
because of peripheral network
disconnection.
Dante started in fail safe mode
Unable to configure Dante,
because the Dante device is
locked.
Resume data lost
Saving setting data failed
CPU temperature too high
Fan hardware error
Too many devices on the network Too many devices are connected to the
Configuration import failed,
because of file download failure
(*)
Configuration import failed,
because of file format error (*)
Configuration import transfer
failed, because of wrong filename
or peripheral disconnected (*)
Configuration import failed,
because the system is busy (*)
Configuration import failed,
because of internal error (*)
Schedule data lost
Description
Automatic audio tuning has failed, because
measurement environment is too noisy.
Automatic audio tuning has failed, because the
system could not detect audio input from Dante
microphone.
Automatic audio tuning has failed, because
peripheral Dante microphone is not registered.
Automatic audio tuning failed, because of
peripheral network disconnection.
Dante has started in failsafe mode.
Dante is currently limited to control settings,
because the device is locked.
The settings saved in internal memory has been
lost.
The device has not started up correctly.
CPU temperature has been too high.
Hardware error has occurred in fan speed.
network.
Configuration import has failed, because of file
download failure.
Configuration import has failed, because of file
format error.
Configuration import transfer has failed,
because of wrong filename or peripheral
disconnected.
Configuration import has failed, because of
system busy.
Configuration import has failed, because of
internal error.
The schedule data saved in internal memory
has been lost.
RM-CR Reference Manual
Do not make any noise during execution.
Check audio input on Audio Input page.
Register at least one peripheral Dante
microphone.
Check network settings and connection.
Execute Failsafe Recovery using Audinate's
firmware update tool.
Unlock device lock using Dante Controller or
check Dante Domain Manager settings.
Initialize the memory. If this dose not solve the
problem, contact your Yamaha dealer.
Turn the power off, then turn the power on after
waiting at least six seconds. If this does not
solve the problem, please initialize the memory.
Contact your Yamaha dealer if problem still
exists.
Turn the power off, let the CPU cool down. Turn
the power on again. If the temperature is still too
high, check the installation environment and
whether dirt or a foreign object could have
clogged the cooling fan, and clean the fan if
necessary.
Check whether dirt or a foreign object could
have clogged the cooling fan, and clean the fan
if necessary. If this does not solve the problem,
please turn the power off, then turn the power
on after waiting at least six seconds. Should this
also fails, contact your Yamaha dealer.
Reduce the number of devices connected to the
network.
Check network, server address settings,
existence of configuration file at server.
Check contents and format of configuration file.
Check file name and connection status of
peripheral device.
Check device status and try again. If it is still
not working, please update firmware or reset all
of the settings.
Try again. If its not working again, please
update firmware or reset all of settings.
If this occurs often, contact your Yamaha
dealer.
52
What to do