Setting Up Using The Web Gui - Yamaha RM-CR Reference Manual

The ADECIA uses PoE or PoE+ as the system for supplying/receiving power. In addition, Dante is used as the connection format.
NOTICE: • When disconnecting the LAN cable from the Dante/PoE port, wait at least five seconds before reconnecting the cable.
Otherwise, damage or malfunctions may result.
• With a Dante network, do not use the EEE function* of the network switch. Although mutual power consumption settings
are automatically adjusted between switches that support the EEE function, some switches do not perform that properly.
As a result, the switch's EEE function may be enabled inappropriately in the Dante network, possibly degrading clock
synchronization performance and interrupting audio. Therefore, please note the following.
- When using managed switches, turn off the EEE function on all ports used for Dante. Do not use a switch that does not
allow the EEE function to be turned off.
- When using unmanaged switches, do not use switches that support the EEE function. In such switches, the EEE func-
tion cannot be turned off.
* EEE (Energy-Efficient Ethernet) function: Technology that reduces the power consumption of Ethernet devices during
periods of low network traffic; also known as Green Ethernet or IEEE802.3az.
• With an ADECIA wireless solution using RM-WAP, be sure to first use the SITE SURVEY function in the Web GUI
"RM-WAP Device Manager" to check the signal conditions in the area. For details, refer to the Reference Manual for the
RM Series Wireless Microphone System.

Setting up using the Web GUI

After connecting this unit to peripheral devices, set it up using the Web GUI "RM-CR Device Manager".
Prepare the following.
• Computer
• A-micro B type USB cable (included with the unit)
1.
Make sure that this unit and all peripheral devices have been turned on.
2.
Connect this unit and the computer with an A-micro B type USB cable.
3.
Start a browser (Google Chrome or Safari) on the computer and type "172.16.0.1" in the address bar.
The first login window of RM-CR Device Manager appears.
USB cable
RM-CR Reference Manual
3
Computer