Yamaha RM-CR Reference Manual page 54

Display
Peripheral communication error
SIP unavailable, because of
server registration error
SIP server registration failed
(code: *)
SIP internal error
Factory reset failed
* reset failed
Web UI login failure by *
Scheduling event failed, because
of *
Bluetooth hardware restarted
Audio processing restarted
SNMP error
Description
A peripheral device within the system was not
found on the network.
SIP is currently unavailable, because of server
registration failure.
SIP server registration failure has occurred.
SIP internal error occurred.
Factory reset has failed.
Partial reset has failed.
Web GUI login failure has occurred by (IP
address).
Scheduling event has failed.
Bluetooth had not worked correctly and was
restarted.
Audio processing failure has occurred, then
restarted.
SNMP operation has failed to start.
RM-CR Reference Manual
Power-on all peripheral devices in the system,
and make sure that they are correctly
connected to the network.
Check SIP and network settings.
Check error code and settings.
Please check that there are no problems with
the RM-CR's SIP configurations.
Check password.
Check the number of scheduled events.
If this occurs often, contact your Yamaha
dealer.
Turn the device off, then on again after waiting
at least six seconds. If this does not solve the
problem, initialize the memory. Contact your
Yamaha dealer if the problem persists.
53
What to do
–