Yamaha RM-CR Reference Manual page 9

[3. CHECK FIRMWARE VERSION]
Check the versions of the firmware, and then click the [NEXT] button.
NOTE: If the firmware must be updated, the version number appears in red.
Update the firmware of RM-CR, RM-CG, RM-TT, RM-WAP and VXL1-16P via TOOLSUpdateFIRMWARE
UPDATE in the Web GUI "RM-CR Device Manager". (Refer to page 45.)
Update the firmware of RM-WCH, RM-WOM, RM-WDR, RM-WGL and RM-WGS via
SETTINGSPeripheralREGISTRATION SETTINGSDetailsVIEWFIRMWARE UPDATE in the Web GUI
"RM-CR Device Manager". (Refer to page 32.)
[4. LOCATE PERIPHERAL DANTE SPEAKERS]
Set [Position] for each speaker to [Left] or [Right] according to the actual mounting position, and then click the [NEXT] button.
NOTE: If
allowing you to confirm the mounting position.
(Identify button) on the right below [Hostname] is clicked, the indicator on the corresponding speaker flashes,
RM-CR Reference Manual
8