Respekta GKE144 Manual page 168

Fitting the activated carbon filter
Fit the charcoal filters (C) before fitting the grease filter.
Fitting the V-flap
If the hood is not equipped with a preinstalled V-flap
(B10), the two flaps must be fitted in the V-flap housing.
The figures showing how to fit the V-flap are purely
guideline because the procedure may vary according to
the model and configuration.
Fitting the V-flap:
1 - Fit the two flaps (1) in the housing (B10);
2 - Orient pin (3) so it is facing upwards;
3 - Insert spindle (4) into holes (5) in housing (B10);
4 - Repeat the same steps for the other flap (2).
en-24
Fig. 5.5
Fig. 5.6
2
5 4 1 3
Fig. 5.7
B10