Advertisement
5.4 Settings CE WTY4
Displacement can lead to the failure of the product warranty.
W1, W2, W3, W4 can adjust the sensitivity of the sensor output signal.
W5 can set the analog output zero point of the voltage.
W7 can set the current zero point of the analog output
W6 can set the gain of the circuit in the voltage output (0-5V/0~10V)
W8 can set the amplification of the circuit in the current output (4-20mA)
Note:
Before delivery all transmitters are calibrated, without special need, do not adjust the
potentiometer.
6 Declaration of conformity
To view the CE declaration, please click on the following link:
https://www.kern-sohn.com/shop/de/DOWNLOADS/
6
CE WT-BA-e-2010.docx
Advertisement
