Copying; Changing The Default Paper Size Using The Control Panel; Copying Documents Or Photos - Epson L3210 User Manual

Copying

See the information here to copy documents or photos using your product.
Note: Copies may not be exactly the same size as your originals.

Changing the Default Paper Size using the Control Panel

Copying Documents or Photos

Changing the Default Paper Size using the Control Panel
Depending on your region, the default paper size for copies is either A4 (8.3 × 11.7 inches
[210 × 297 mm]) or Letter (8.5 × 11 inches [216 × 279 mm]).
• To change the default paper size to A4 (8.3 × 11.7 inches [210 × 297 mm]), make sure the product is
turned off, then hold down the
on. When the product turns on, release both buttons.
• To change the default paper size to Letter (8.5 × 11 inches [216 × 279 mm]), make sure the product is
turned off, then hold down the
on. When the product turns on, release both buttons.
Parent topic:
Copying Documents or Photos
You can copy color or black-and-white documents or photos onto plain paper.
1. Place your original document or photo on the scanner glass.
2. Load plain paper in one of these sizes: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7
inches [210 × 297 mm]).
3. Do one of the following to start copying:
• To copy a black-and-white original, press the
• To copy a color original, press the
• To copy a black-and-white or color original in draft mode, press the
color copy button and the
color copy button and press the
B&W copy button and press the
Copying
stop button at the same time.
power button to turn the product
power button to turn the product
B&W copy button.
color copy button.
28
B&W copy button or the