Epson L3210 User Manual page 104

• This product requires careful handling of ink. Ink may splatter when the ink tanks are filled or refilled
with ink. If ink gets on your clothes or belongings, it may not come off.
• Do not open the ink bottle package until you are ready to fill an ink tank. Ink bottles are vacuum
packed to maintain reliability. If you leave an ink bottle unpacked for a long time before using it, print
quality may be affected.
• If the ink level is below the lower line on an ink tank, refill the ink. Continued use of the product when
the ink level is below the lower line on an ink tank could damage the product.
• Visually check the ink levels in the product's ink tanks to confirm the actual ink levels. Continued use
of the product when the ink is below the lower line on an ink tank could damage the product.
• Do not maintain low ink levels for extended periods of time.
• Epson recommends filling all ink tanks to the upper line when the product is not operating.
• After bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for
at least three hours before using it.
• Use the ink bottle before the date printed on the package.
• After opening an ink bottle, Epson recommends using it as soon as possible.
• Wipe off any ink around the tanks and ports with a clean, lint-free cloth or cotton swab.
• Store ink bottles in a cool, dark place. Keep them out of direct sunlight.
• Do not store the ink bottles in high or freezing temperatures.
• Store the ink bottles in the same environment as the product. When storing or transporting an opened
ink bottle, do not tilt the bottle and do not subject it to impacts or temperature changes. Otherwise, ink
may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink bottle upright
when tightening the cap, and take measures to prevent ink from leaking when you transport the bottle.
Ink Bottle and Ink Tank Information
• To maintain optimum print head performance, some ink is consumed from all ink tanks during printing
and when performing maintenance operations, such as cleaning the print head. Ink may also be
consumed when the product is turned on.
• Some ink in the ink bottles supplied with your product is used during initial setup; these ink bottles will
print fewer pages compared to subsequent ink bottles.
• Quoted ink yields may vary depending on the images you are printing, the paper type you are using,
how often you print, and environmental conditions such as temperature.
• The ink bottles may contain recycled materials, but this does not affect product function or
performance.
104