Running A Product Check - Epson L3210 User Manual

Parent topic:
Related concepts
Print Head Nozzle Check
Related references
Paper Jam Problems
Where to Get Help
Related tasks
Loading Paper in the Sheet Feeder

Running a Product Check

Running a product check helps you determine if your product is operating properly.
1. Press the
2. Load a few sheets of plain paper in the product.
3. Hold down the
4. When the product turns on, release both buttons.
The product prints a nozzle check pattern.
Note: It can take a few seconds for the nozzle check to start printing. If the nozzle check does not
start printing after a few seconds, make sure there is paper loaded in the printer.
Solving Problems
power button to turn the product off.
stop button and press the power button to turn the product on.
139