Page 3
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed. #1 x 1 pc Table Top #2 x 4 pcs Subjoin leg #3 x 1 pc Leg Stand #4 x 1 pc Base A...
Page 4
Align subjoin legs (#2) to the leg stand (#3) then insert. Align base A and B (#4, #5) to the leg stand (#3), then secure with bolts (#A, #H) using the Allen wrench (#G).
Page 5
Align subjoin legs (#2) to the leg stand (#3) then insert. 1) Prepare 4 bolt assemblies. Place lock washer (#C) onto the long bolt (#A), then place flat washer (#B) onto the same long bolt (#A). 2) Align the support shelf (#6) to the leg stand (#3), then insert bolts (#A) and secure.
Page 6
1) Prepare 4 bolt assemblies. Place lock 1) Prepare 4 bolt assemblies. Place lock washer (#F) onto bolts (#D), then flat washer (#F) onto bolts (#D), then flat washer (#E) onto the same bolts (#D). washer (#E) onto the same bolts (#D). 2) Align the leg stand to the table top, then 2) Align the leg stand to the table top, then secure with bolts (#D) by using an Allen...
Need help?
Do you have a question about the Foster CM3437RT and is the answer not in the manual?
Questions and answers