Remove the optional security screw if your
6
notebook has one.
Slide the bay module release latch. The
7
module moves out slightly.
Slide the bay module out.
8
Firmly push the new bay module straight
9
into the bay until the latch clicks into place.
Reinstall the optional security screw if your
10
notebook has one.
Turn your notebook over.
11
Reconnect the optional port replicator.
12
Open the LCD panel.
13
If your notebook is on, click OK to continue
14
working on your notebook.
- OR -
If your notebook is off, turn it on.
Changing modules
Security screw
35