3. Description of the Screen
Historical Data Auto Save Screen
Selecting the [Start up]-[Program]-[OIS-DS program] - [Histrical data AutoSave] menu displays
the following dialog box.
(1)
(2)
(3)
(5)
(6)
Screen display
1) Setting Information
Here, set the following data for automatic saving.
• Basic time
• Cycle
Figure 3.1 Historical Data Auto Save Dialog Box
This is the basic time to start saving automatically.
Automatic preservation is performed in the specified cycle based on this basic time.
Sets 0 to 23 in Hour and 0 to 59 in Miniute. (Default data : 0 Hour 5 Min)
INSTRUCTION:
When your system uses the report function, you must not set just time "XX:00".
Saving cycle.
Select one from 1, 2, 3, 4, 6, 8, 12 and 24 hour. (Default data : 24 hour)
3. Description of the Screen
(4)
(8)
(7)
7