Limits, Marker, And Machine Direction; Figure 3-2: Machine Direction - Aerotech ANT95L Series Hardware Manual

ANT95L Hardware Manual

3.4. Limits, Marker, and Machine Direction

Aerotech stages are configured to have positive and negative "machine" directions. The machine
direction defines the phasing of the feedback and motor signals and is dictated by the stage wiring
(refer to Section
the stage. Programming direction is typically selectable in the controller, while machine direction is
hardwired in the stage.
www.aerotech.com
3.2.). Programming direction of a stage is set by the controller that is used to move
Figure 3-2 shows the machine direction of ANT95L stages.
Figure 3-2:
3.4. Limits, Marker, and Machine Direction
Machine Direction
31