Table of Contents
Advertisement
ANT95V-3 Hardware Manual
3.4. Limits, Marker, and Machine Direction
Aerotech stages are configured to have positive and negative "machine" directions. The machine direction
defines the phasing of the feedback and motor signals and is dictated by the stage wiring (refer to
3.5.
for Motor and Feedback phasing information). Programming direction of a stage is set by the controller
that is used to move the stage. Programming direction is typically selectable in the controller, while machine
direction is hardwired in the stage.
www.aerotech.com
Electrical Specifications and Installation
Figure 3-2
shows the machine direction of ANT95V-3 stages.
Figure 3-2:
Machine Direction
Chapter 3
Section
27
Advertisement
Table of Contents
