Chapter 1: Overview; Figure 1-1: Gen2 Vs Gen1 Visual Comparison; Table 1-1: Model Numbers And Ordering Options - Aerotech ANT95L Series Hardware Manual

ANT95L Hardware Manual

Chapter 1: Overview

The specifications in this manual pertain to the second generation of ANT95L stages. The ordering
options (Table 1-1) and basic specifications
between second and first generation stages:
an updated Aerotech logo
l
a revised shipping clamp design
l
and the introduction of additive (3D-printed) parts.
l
Refer to Figure 1-1. Contact Aerotech if you need a first generation manual.
Table 1-1: Model Numbers and Ordering Options
ANT95L Single-Axis Linear Direct-Drive Nanopositioning Stage
Travel (Required)
-025
-050
-075
-100
Feedback (Required)
-E1
-E2
-E4
Mounting Plate (Optional)
-MP
Performance Grade (Required)
-PL1
-PL2
Integration (Required)
-TAS
-TAC
www.aerotech.com
(Section
Figure 1-1: GEN2 vs GEN1 Visual Comparison
25 mm travel
50 mm travel
75 mm travel
100 mm travel
Incremental linear encoders, 1 Vpp amplified sine output
Incremental linear encoders, digital RS422 output, 5 nm electrical
resolution
Incremental linear encoders, 1 Vpp amplified sine output, high-
performance
Mounting plate
Base Performance
High-accuracy performance
Test as system: Testing, integration, and documentation of a group of
components as a complete system that will be used together.
Test as components: Testing and integration of individual items as discrete
components that ship together.
1.3.) have changed. The visual differences
Chapter 1: Overview
11