Replacing The Diskette Drive - Gateway Profile Profile 6 Hardware Reference Manual

Chapter 3: Maintenance Basics

Replacing the diskette drive

18
To replace the diskette (floppy) drive:
Remove the back panel by following the instructions in
1
on page 12.
Remove the power supply by following the instructions in
2
power supply" on page
from the system board.
Pull the diskette drive release latch out (toward you).
3
Slide the diskette drive out (toward you) until it stops, then unplug the
4
cables from the drive.
16. You do not need to unplug the power supply
www.gateway.com
"Opening the case"
"Replacing the