Gateway Profile Profile 6 Hardware Reference Manual page 26

Chapter 3: Maintenance Basics
22
Grasp the hard drive itself, then pull it the rest of the way out of your
4
computer.
Make sure the hard drive release lever is still fully extended, then slide the
5
new hard drive all the way into the hard drive bay by pushing on the hard
drive itself (not the lever). Make sure that you slide the drive in until it is
flush with the edge of the hard drive bay.
Reconnect the cables to the drive.
6
Replace the back panel by following the instructions in
7
back panel" on page
Reconnect all external cables and the power cord.
8
Turn on your computer.
9
If Windows does not start, install Windows using the operating system CD
10
that came with your computer, then install the drivers and applications.
Follow any instructions that may be printed on the operating system CD.
13.
www.gateway.com
"Replacing the