Great Little Trading L5290 Quick Start Manual

Great Little Trading L5290 Quick Start Manual

Crompton low bookcase, white

Advertisement

Crompton Low Bookcase, White
Assembly Difficulty
one-person job
easy -
medium
- hard
L5290
V1
19/10/2021
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
A few important pointers before you start:
Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we find separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
Make sure you have the right tools. Allen keys are provided
if required, but screw drivers and other tools are not. You'll
find details of the tools you need at the beginning of the
instructions.
It's a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it's been
assembled.
Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L5290 and is the answer not in the manual?

Questions and answers

Summary of Contents for Great Little Trading L5290

  • Page 1 Crompton Low Bookcase, White A few important pointers before you start: L5290 • Please read the instructions right through before you start, and check that all the components have been included in the pack;...
  • Page 2: Safety Warnings

    Safety Warnings: Customer Service: • If you find that any components are missing or damaged, please do • Adult assembly required. not begin assembly and do not use the item. Please contact GLTC • Unassembled product contains small parts which may present a choking Customer Services on 0344 848 6000 immediately.
  • Page 3: Component Checklist

    Component Check List Hardware Check List 8x Cam Dowels 16x Wooden Dowels 1x Side Panel 1x Side Panel 8x Cam Locks 4x Crosshead Bolts 1x Shelf Panel 1x Top Panel 4x Barrel Nuts 2x Wood Screws 1x Footed Base Panel 2x Batons 25mmL 1x Anti-Tip Kit...
  • Page 4 Hardware for Step 2: Hardware for Step 1: *Larger drill holes on side panels 2x #2 Wooden Dowels 4x #1 Cam Dowels STEP 1: 2x #3 Cam Locks Working on a protective surface like a carpet or a rug, position both side panels (A) & (B) Note: You will be with drill holes facing up.
  • Page 5 STEP 3: STEP 4: Hardware for Step 3: Hardware for Step 4: Position the remaining side panel B with the Prepare the top panel (D) by recessed long edge with drill holes facing up inserting 4x cam dowels (#1) into 2x #2 Wooden Dowels and attach to shelf panel (C) as in step 2, using the holes in the corners as shown.
  • Page 6 STEP 6: STEP 5: Hardware for Step 6: Hardware for Step 5: Attach the base panel (E) to the unit. Insert 4x wooden dowels (#2) into the inner holes on the top panel (D) then position onto the Insert 4x wooden dowels (#2) to the outer 4x #4 Crosshead Bolts unit with the recessed edge facing up.
  • Page 7 STEP 7: Please note: Hardware for Step 8: Hardware for Step 7: Attach the 2x batons (F) on each side of the These arrows indicate the drill base panel. holes used for the anti-tip kit brackets & hardware included 4x #2 Wooden Dowels 18x #7 Screws (14mm) Insert 2x wooden dowels (#2) into the holes in with your unit.
  • Page 8 Your unit is now ready to be attached to the wall using hardware that is suitable for the walls in your home. Copyright© 2022 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.

Table of Contents