Great Little Trading L5288 Quick Start Manual

Great Little Trading L5288 Quick Start Manual

Small townhouse bookcase

Advertisement

Quick Links

Small Townhouse Bookcase
Assembly Difficulty
one-person job
easy -
medium
- hard
L5288
V2
15/03/2022
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
A few important pointers before you start:
Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we find separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
Make sure you have the right tools. Allen keys are provided
if required, but screw drivers and other tools are not. You'll
find details of the tools you need at the beginning of the
instructions.
It's a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it's been
assembled.
Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L5288 and is the answer not in the manual?

Questions and answers

Summary of Contents for Great Little Trading L5288

  • Page 1 Small Townhouse Bookcase A few important pointers before you start: L5288 • Please read the instructions right through before you start, and check that all the components have been included in the pack;...
  • Page 2: Customer Service

    WARNING! Customer Service: IN ORDER TO PREVENT OVERTURNING THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE PROVIDED. • If you find that any components are missing or damaged, please do Please see further information in the assembly manual and on the back panel. not begin assembly and do not use the item.
  • Page 3: Component Checklist

    Component Check List Component Check List 1x Upper Back Panel 1x Roof Panel 1x Side Panel 1x Side panel 1x Mid Back Panel 1x Lower Back Panel Hardware Check List 1x Mid Shelf 1x Upper Shelf 18x Cam Locks 10x Cam Dowels 24x Wooden Dowels 4x Pivoting Cam Dowels 1x Base Panel...
  • Page 4 Hardware for Step 1: Hardware for Step 2: Using Cam Locks: When inserting into the panel, ensure that each cam lock’s arrow is pointing towards the drill hole on 2x #2 Cam Dowels 8x #2 Cam Dowels the side edge of the panel & the dowel that it will be receiving.
  • Page 5 Hardware for Step 4: Hardware for Step 3: 2x #1 Cam Locks 2x #1 Cam Locks 2x #3 Wooden Dowels 2x #3 Wooden Dowels Large Drill Holes Large Drill Holes BASE BASE Small Drill Holes Small Drill Holes STEP 4: STEP 3: Insert 2x wooden dowels (#3) into the holes next to the remaining cam Insert 2x wooden dowels (#3) into the inner holes on the RH end of...
  • Page 6 Hardware for Step 5: Hardware for Step 6: 4x #1 Cam Locks 6x #8 Barrel Nuts 4x #3 Wooden Dowels 6x #7 Crosshead Bolts 6x #3 Wooden Dowels (With larger drill holes) BASE (With smaller drill holes) BASE STEP 6: Attach base panel.
  • Page 7 Hardware for Step 7: Hardware for Step 8: 4x #7 Crosshead Bolts 4x #4 Pivoting Cam Dowels 4x #3 Wooden Dowels BASE STEP 8: Prepare the roof panels (G & I) by inserting 2x pivoting cam dowels (#4) into the outer small holes of BOTH panels as shown. BASE The holes are drilled at an angle and it is best to insert the hardware at the same angle as the hole.
  • Page 8 Hardware for Step 10: Hardware for Step 9: 2x #5 Double-Ended Cam Dowels 4x #1 Cam Locks 1st Position Final Position Start STEP 10: To acheive the correct roof alignment, please follow this guidance. Do not tighten one side of the roof hardware fully first or it will not align. Insert 4x cam locks (#1) into the large holes on the inside of the roof panels (G &...
  • Page 9 STEP 12: Hardware for Step 12: Hardware for Step 11: Keeping the unit on the floor for the moment, position the 3x back panels (J, K & L) into the recessed edges of the unit as shown. 18x #6 Back Panel Screws 4x #3 Wooden Dowels Ensure the drill holes on the panels are aligned with the pilot holes on the unit and that the...
  • Page 10 Attach the 2nd set of brackets to the wall using hardware that is suitable for the walls in your home (not supplied). Copyright© 2022 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.

Table of Contents