IKEA KULINARISK Manual page 8

ENGLISH
Installation modes
The hood has been designed to be installed
and used either as a "Exhaust mode", or as
a "Recirculation mode".
Exhaust mode (see symbol
installation booklet)
Cooking steam is sucked and
channelled outside the house through
a discharge duct (not supplied), fitted to
the hood steam outlet.
Ensure that the discharge duct is
correctly fitted to the air outlet, unit
using an appropriate connection
system.
Recirculation mode (see symbol
in installation booklet)
The air is filtered through one or more
the charcoal filters, and then resent into
room.
Important: Ensure appropriate air
circulation around the hood.
Important: If the hood is supplied
without charcoal filters and installed on
recirculation mode, these must be fitted
before the hood can be used. Filters are
available in shops.
The hood should be installed away from
particularly dirty areas, windows, doors
and heat sources.
The accessories for wall fixing are not
included because wall made of different
materials require different types of
fixing accessories. Use fixing systems
9
suitable for the walls of your home and
the weight of the appliance. For more
details, contact a specialized dealer.
Keep this booklet for future
consultation.
Filters Alarm.
When the filter alarm is activated, the
following messages will appear over
time:
Grease filter must be cleaned:
"A" key flashes once per second. For
maintenance see paragraph Care and
in
cleaning.
Anti-odour filter must be cleaned:
"A" key flashes twice per second. For
maintenance see paragraph Care and
cleaning.
Once the filters have been regenerated
reset the alarm signal (see paragraph
Control Panel).
9
8