8.Startup and Shutdown Procedures
8.1 Startup Procedure
The following screenshots are from Windows XP. The process is the same for windows Vista.
1) Connect the USB of the PC and 3D image sensor.
2) Turn on the power supply of the 3D image sensor.
*Turn on the power supply of the 3D image sensor only after the PC has
been turned on.
3)The window for the New Hardware Detection Wizard will appear on the PC screen only when
the main unit is connected and has been started up the first time. Please install according to the
given procedure.
*The connecting Wizard may appear this time or every time, depending on the Wizard. In any
case, please follow the same procedure.
4) Select "Install from a list or specific location (Advanced)" and click "Next."
9/15