Seat IBIZA Owner's Manual page 11

10 Operation
● Keep the air vents directed away from the microphone (located on the
interior light).
● At high speeds, you might need to speak louder to drown out back-
ground noises.
● Avoid other noises in the vehicle during a dialogue (e.g. other passen-
gers speaking in the vehicle).
● Avoid speaking when the system is saying a cue.
● The hands-free microphone is directed towards the driver, therefore, on-
ly the driver should try to operate the system.
● To make a call when there is heavy background noise we recommend us-
ing the speech controlled telephone book instead of speaking individual
digits. This will help avoid mistakes when specifying telephone numbers.
Voice control orders (commands)
The voice control can be used in the following languages:
Spanish, Mexican Spanish, German, English, US English, French,
Canadian French, Italian, Portuguese, Czech, Russian and Dutch.
Basic commands valid in any part of the menu
HELP After this command the system repeats all the possible com-
mands
CANCEL The dialogue ends
Other commands for operating the Bluetooth system
Command Action
CALL This command is used to call a contact in the phone book.
[NAME]
PHONE After this command you can play all the contacts, select one
BOOK to call or record/delete the name by voice.
CALL LIST The Received calls, Missed calls or Dialled numbers list is
read.
DIAL NUM- After this command you can enter a phone number to call
the desired person ⇒ p age 10
BER
REDIAL After this command the system dials the last number.
PHONE BOOK

OTHER OP-
TIONS
SETTINGS
CALL HISTORY
a)
Because of the different pronunciations of each language, some of the names may not be
read as you expected. Because of this you can record up to 15 contacts with your own
voice.
b)
It is recommended to restore the factory defaults if you are going to sell the vehicle, so that
your personal details, such as PIN, contacts, calls, etc. are deleted, and the settings are
restored.
DIAL NUMBER command
After saying the DIAL NUMBER command the system asks you to enter a tel-
ephone number. The telephone number can be entered as a sequence of
digits pronounced coherently (complete number), in series of digits (sepa-
rated by a brief pause) or in digits pronounced separately. After each series
of digits (separated by a brief pause) the digits recognised until then are re-
peated.
CALL contact
RECORD contact name
READ PHONE
a)
by voice
BOOK
DELETE contact name
by voice
UPDATE phone book
LONG DIALOGUE / SHORT DIALOGUE
CHANGE PIN
BLUETOOTH
Activate VISIBILITY
b)
RESTORE FACTORY DEFAULTS
RECEIVED calls
MISSED calls
DIALLED numbers
