Transmitters - Shure SLX-D Manual

2. Channel Name
3. Gain
4. Mic/Line Level
5. Advanced Settings
6. Help

Transmitters

① Power LED
◦ Green = unit is powered on
◦ Red = low battery
② On/Off Switch
Powers the transmitter on or off.
1.4 Manual Fre-
Manually tune the receiver to a desired frequency
quency Setup
Customize the channel name
Monitor audio levels and adjust the receiver gain
Switch between output levels
•
•
5.1 Device Lock
•
5.2 Network Con-
Switch between automatic and manual IP addressing
figuration
5.3 Controller Ac-
Block or allow third-party control access
cess
5.4 Transmitter
Apply and sync transmitter presets
Preset
5.5 Device Preset Save current receiver settings or restore last saved settings
5.6 Factory Reset Restores all settings to factory defaults following a system reboot
5.7 Transmitter
Update transmitter firmware using IR sync
Firmware
5.8 About Displays firmware version and serial number
Provides a link to additional materials (http://help.shure.com/slxd4)
Unlock: Receiver is unlocked
Lock Menu: Receiver settings are locked
Lock Menu & Power: Receiver settings and power button are
locked
Shure Incorporated
12/43