Transmitters - Shure ULX-D Manual

Transmitters

① Power LED
◦ Green = unit is powered on
◦ Red = low battery or battery error (see Troubleshooting)
◦ Amber = power switch is disabled
② On/Off Switch
Powers the unit on or off.
③ SMA Connector
Connection point for RF antenna.
④ LCD Display:
View menu screens and settings. Press any control button to activate the backlight.
⑤ Infrared (IR) Port
Align with the receiver IR port during an IR sync for automated transmitter programming.
⑥ Menu Navigation Buttons
Use to move through parameter menus and change values.
exit Acts as a 'back' button to return to previous menus or parameters without confirming a value change
enter Enters menu screens and confirms parameter changes
▼▲ Use to scroll through menu screens and to change parameter values
⑦ Battery Compartment
Requires Shure rechargeable battery or 2 AA batteries.
⑧ AA Battery Adapter
◦ Handheld: rotate and store in the battery compartment to use a Shure rechargeable battery
◦ Bodypack: remove to accommodate a Shure rechargeable battery
⑨ Bodypack Antenna
For RF signal transmission.
⑩ Integrated Antenna
For RF signal transmission.
⑪ Microphone Cartridge
See Optional Accessories
⑫ TA4M / LEMO Input Jack
Connects to a microphone or instrument cable.
for a list of compatible cartridges.
Shure Incorporated
12/63