Navigating The Receiver Menus - Shure SLX-D Manual

⑧ Power Supply Jack
Connection point for DC power supply.
⑨ Ethernet Port
For network connection.
◦ Amber LED (network speed):
off = 10 Mbps, on = 100 Mbps
◦ Green LED (network status):
off = no network link, on = network link active
flashing = rate corresponds to traffic volume
⑩ XLR Audio Output
Balanced (1: ground, 2: audio +, 3: audio - )
⑪ 1/4" Instrument/Auxiliary Output
Impedance Balanced (Tip: audio+, Ring: audio-, Sleeve: ground)
⑫ Antenna Connectors
BNC connector for receiver antennas

Navigating the Receiver Menus

The receiver has a main menu for setup and configuration and an advanced menu to access additional receiver functions. Use
the control knob to navigate menu screens and confirm selections; use the exit button to return to the previous level.
Main Menu
Push the control knob button to access the menu, and rotate to advance to the next menu screen.
1. Frequency Setup
1.1 Guided Fre- Step­by­step instructions to initialize a new system, or to add a re­
quency Setup ceiver to an existing system
Receiver automatically scans for the best available group, if applic­
able.
1.2 Group Scan
Note: Some bands consist of only a single group. RF performance is the same in
single-group bands as in bands that support multiple groups.
Receiver automatically scans for available channels within the se­
1.3 Channel Scan
lected group
Shure Incorporated
11/43