Filling The Clean Water Tank - Vax VCSD-03 User Manual

Table of Contents

Advertisement

!
!

FILLING THE CLEAN WATER TANK

IMPORTANT: Only use Vax Commercial hard floor cleaning detergent. Using other cleaning detergent may cause
!
!
excess foaming, which will prevent the machine from working effectively. Using other detergents will invalidate
the warranty.
Press the release button on the
clean the water tank. Pull to remove
the tank.
Pour the detergent into the tank.
Top up the tank to the fill line with
warm water (max 40°C).
Vax Commercial Careline: (UK) 0330 026 4275
VCSD-03_HardFloor_Commercial_UG_[VAX001553]_PRINT_261114.indd 9
Twist the clean water tank cap
anti-clockwise and lift to remove.
Twist the clean water tank cap
clockwise to re-fit.
Preparation
Using the clean water tank cap,
pour the required amount of
detergent (approx. 40ml per 1 litre
of water).
Tilt the clean water tank and line up
with the VCSD-03. Push until it clicks
into place.
27/11/2014 08:32
9

Advertisement

Table of Contents
loading

Table of Contents