Download Print this page
Vax VX36 Let's Get Started
Vax VX36 Let's Get Started

Vax VX36 Let's Get Started

Steam fresh reach

Advertisement

Quick Links

Steam Fresh Reach
Let's get started
vax.com.au
VX36

Advertisement

loading

Summary of Contents for Vax VX36

  • Page 1 Steam Fresh Reach Let’s get started vax.com.au VX36...
  • Page 2 Let’s talk safety This steam cleaner is intended for household use only and NOT for commercial or industrial use. WARNING: Danger of scalding WARNING: The stick steam mop head gets very hot during operation. Basic • Only use the steamer indoors and keep the area you’re cleaning well lit. •...
  • Page 3 • Always stand the steamer using the wall bracket or securely against a wall/fixed structure. • Always fill the twin tank with water/Vax detergent only as per the instructions in this user guide, never add perfume, stain remover or products containing alcohol.
  • Page 4 We ’ re here if you need us For troubleshooting simply visit or call: Australia: 1300 361 505* New Zealand: 0800 800 900* vax.com.au vax.co.nz *Monday – Friday: 8:30am -5:00pm Calls are charged at the standard local rate. Please make note of the serial...
  • Page 5 Contents Steam Fresh Reach Included with Let’s talk safety your machine Getting to know your machine Vax Steam Detergent Getting started 2x Microfibre Pad Using your machine Carpet Glider Taking care of your machine Tool Storage Bag Accessories Concentration Tool...
  • Page 6 Getting to know your machine Control panel Handle Twin tank release button Power ON/OFF switch Water tank Handheld Detergent tank Handheld release buttons Quick release cord hooks – Lower cord hook does not rotate Steam reach wand Nano head Steam reach wand release pedal Floorhead Steam burst button...
  • Page 7: Getting Started

    Getting started Before you begin CAUTION: The steamer and accessories get very hot during use, always allow them to cool down before handling, or changing to handheld or steam wand mode. Always switch off and unplug the steamer when assembling. Always switch off the steamer before emptying the twin tank or changing the cloths/accessories.
  • Page 8 Getting started Fixing the wall bracket with adhesive strip Fully assemble the unit and Remove the Attach the wall position it against the wall adhesive cover. bracket to the handle. where it will be stored. Stand the unit close and Firmly press the handheld and wall upright against the wall.
  • Page 9: Using Your Machine

    Using your machine IMPORTANT: Always test on an inconspicuous area of flooring first before using detergent. Don’t over fill the clean twin tanks or exceed the maximum amount required. Don’t use the steamer without water in the water tank. Always top up with water when needed.
  • Page 10 Using your machine IMPORTANT: Never use the steam floor steamer without a microfibre cleaning pad attached to the floorhead. Never leave the floor steamer in one spot for an extended period of time or with a damp or wet microfibre pad attached as this may damage the floor surface.
  • Page 11 Using your machine For more concentrated steam use the steam boost. After cleaning, switch off and unplug the steamer. For best results use max steam + detergent setting. Allow the steamer to cool down. Hold the corner Press the steam boost button on the floorhead of the microfibre pad down with your foot and lift to activate.
  • Page 12: Refreshing Carpets

    Using your machine IMPORTANT: When using on carpets, always make sure the microfibre cleaning pad covers the floorhead entirely before using the carpet glider. Only use the carpet glider when refreshing carpets. Never use the carpet glider on hard floors. Never leave the floor steamer in one spot for extended period of time or with a damp or wet pad attached as this may damage the floor surface.
  • Page 13 Using your machine When releasing the carpet After refreshing carpets, glider, ensure the steam switch off and unplug trigger is fully released the steamer. Allow the first. To release the carpet steamer to cool down. glider, place your foot on Hold the corner of the the clip and press down.
  • Page 14 Using your machine To produce steam squeeze The Steam Reach wand can be used at different To improve your the trigger in short bursts. heights for hard to reach places. comfort, use the Don’t hold the trigger additional handgrip continuously to prevent on the handheld over saturation.
  • Page 15 Using your machine Press the button To produce steam To re-attach the handheld To improve your on the control panel squeeze the trigger to the reach wand, grip comfort, use the to select preferred in short bursts. the top of the steam wand, additional handgrip setting steam/detergent.
  • Page 16 Using your machine Using the accessory tools Concentration nozzle Brushes Squeegee tool Window/shower tool Concentrated steam flow to lift grime. Hard-wearing for use on hard Clean your windows and mirrors Use on any sealed surface in the sealed surfaces. Always test quickly and easily.
  • Page 17 Taking care of your machine CAUTION: Switch off the steamer and unplug from the mains. Allow the steamer to fully cool down before performing any maintenance or troubleshooting checks. Don’t leave water or detergent in the tanks between uses, as this can effect the steamer performance, the water/detergent twin tanks need to be emptied and rinsed after each use.
  • Page 18: Replacing The Hard Water Filter

    Taking care of your machine CAUTION: Switch off the steamer and unplug from the mains. Allow the steamer to fully cool down before performing any maintenance or troubleshooting checks. Cleaning the Scrub Brush Press the steam wand Pull to remove Remove any dirt /debris release pedal and pull the Scrub brush...
  • Page 19 Let’s talk technical CAUTION: Switch off and unplug steamer, allow to fully cool down before performing maintenance or troubleshooting checks. Clearing blockages from the handheld Place the handheld on a firm surface and hold securely. Grip the large end of the de-scaling pin, insert the pin into the nozzle and push the de-scaling pin through.
  • Page 20 What to do if it goes wrong Problem Solution • Check the ‘This pack contains’ panel on the box to make sure the part is included with your machine. There is an accessory missing? • Check the On/Off button has been switched to on. The red light should illuminate when on.
  • Page 21 Getting in touch * Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
  • Page 22 Notes...
  • Page 23 Notes...
  • Page 24 Distributed by Techtronic Industries Australia Pty. Ltd. 31 Gilby Road, Mt Waverley, VIC 3149 Australia. Careline AU: 1300 361 505 www.vax.com.au Careline NZ: 0800 800 900 www.vax.co.nz...