Preparation - Vax VCSD-03 User Manual

INITAL SETUP: ASSEMBLING YOUR VCSD-03
Raise the machine to upright position
until it clicks and locks into place.
Line up and push the nozzle until it
clicks into place.
Vax Commercial Careline: (UK) 0330 026 4275
VCSD-03_HardFloor_Commercial_UG_[VAX001553]_PRINT_261114.indd 7
Pull the nozzle release latch
upwards and forwards to remove.
Fit the battery onto the VCSD-03
(underneath the battery cover).
The battery will click into position
when correctly fitted.

Preparation

Lie the VCSD-03 on its back. Line
up the spindle on the SpinScrub™
brushes with the plate on the base of
the VCSD-03. Push the SpinScrub™
brushes firmly to lock into place.
27/11/2014 08:32
7