Operating The Machine - Vax VCSD-03 User Manual

Operating the machine

! !
IMPORTANT: Please refer to floor manufacturer's care recommendations before use, and test the flooring by
! !
cleaning a small hidden area with the VCSD-03. If no damage or discolouration has occurred once the area is dry,
continue cleaning. Not suitable for use on water sensitive flooring. Vacuum the hard floor thoroughly prior to using your
VCSD-03.
Pull to open the battery
cover. Fit the battery to the
VCSD-03. The battery will
click into position when
correctly fitted.
TIP: To pick up more water, move the machine back and forth over the area, ensuring the trigger is not pressed.
NOTE: To use the scrubbing function only, push the cleaning mode selector forward one click to the central position.
The machine will not pick up dirty water when the selector is in this position.
10
VCSD-03_HardFloor_Commercial_UG_[VAX001553]_PRINT_261114.indd 10
Press the handle
release pedal and pull
handle backwards.
Push the scroll selector
control forward 2 clicks.
Squeeze the trigger to
release clean water and
detergent (WASH mode)
and release trigger to
pick up dirty water
(DRY mode).
vaxcommercial.co.uk
In WASH mode, with the
trigger held down to
release clean water and
detergent, slowly move the
VCSD-03 forward to arms
length. Release the trigger
and pull the VCSD-03
backwards to pick up.
27/11/2014 08:32