Filling Clean Water Tank - Vax Home Pro User Manual

S6S Home pro steam cleaner UG 28.02.13_User guide 07/03/2013 11:41 Page 5
Operation
Attaching the velcro microfibre cleaning pad
For use on sealed hard floors or refreshing carpets.
WARNING: To reduce the risk of personal injury, unplug the steamer when fitting the cleaning pads.
IMPORTANT: Never use the steam cleaner without a cleaning pad attached to the floor head.
Before you begin cleaning
IMPORTANT: Your detergent control dial will be set to 'tough stains' when you remove your steamer from the box. If you do not
want to use detergent on your hard flooring/hard surfaces, this must be rotated to the 'steam/refreshes carpets only' position.
Always test on an inconspicuous area of flooring/surface first before using detergent.

Filling clean water tank

To remove lid, rotate anti-clockwise.
IMPORTANT: Do not use hot or boiling water to fill clean water tank. Do not over fill the water tank.
IMPORTANT: Do not operate your steam cleaner without water in the clean water tank.
vax.co.uk
Place the triangular floor head on top of
the velcro microfibre pad making sure the
mop head covers the entire pad. The blue
face should be in contact with the floor.
Do not overfill.
Using the measuring jug and funnel, only
fill up to 1.4L. Allow space to be left at
the top.
Ensure the lid is securely fastened by
rotating clockwise before use.
5