Subscribe to Our Youtube Channel
Related Manuals for Vax VX69
Summary of Contents for Vax VX69
- Page 1 SteamClassic STEAM CLEANER QUICK AND EASY STEAM CLEANING LET’S GET STARTED. vax.com.au vax.com.au VX69 vax.co.nz vax.co.nz...
-
Page 2: Let's Talk Safety
Let’s talk safety READ ALL THE INSTRUCTIONS BEFORE USING THIS APPLIANCE This steam mop is intended for household use only and NOT for commercial or industrial use. Basic When using the cleaner basic safety precautions should always be safety observed, including the following: precautions •... - Page 3 WARNING: Danger of scalding WARNING: The stick steam mop head gets very hot during operation. IMPORTANT: The steam mop is equipped with a thermostat and a thermal cut-out. If for any reason the unit should overheat, the thermostat will automatically turn the unit off. Should this occur, unplug the steam mop from the electrical outlet and turn off the switch.
- Page 4 Let’s talk safety • Don’t touch any hot areas/accessories on your steam mop. It’s normal for the steam mop and accessories to heat up during use, always allow them to cool down before handling • Don’t use the steam mop if it has been dropped, if there are visible signs of Don’ts damage or if it is leaking, if it has been immersed in water or left outdoors •...
- Page 5 l for • Don’t use the steam mop with incorrect voltage as this may result in damage or injury to the user. The correct voltage is listed on the ratings label • Don’t leave this steam mop unattended while it is connected to the supply mains s of •...
- Page 6 For troubleshooting simply visit or call: Australia: 1300 VAX AUS (1300 829 287)* vax.com.au New Zealand: 0800 VAX NZL (0800 829 695)* vax.co.nz *Monday – Friday: 8:30am -5:00pm Calls are charged at the standard local rate. Please make note of the serial...
-
Page 7: Table Of Contents
Contents Steam Cleaner Included with your machine Let’s talk safety Getting to know your machine Carpet glider Getting started Using your machine Microfibre pad Taking care of your machine What to do if it goes wrong Concentration nozzle Getting in touch Accessories Cooling tray... -
Page 8: Getting To Know Your Machine
Power on indicator Water tank cap Water tank (Part on unit) Floorhead release button Floorhead Carpet glider Technical Specifi cation Accessories Model VX69 Microfi bre pads VTHSP & VTHSP4 Voltage 220-240V ~ 50/60Hz Wattage 1300W Cord length 5m This product Indoor Read... -
Page 9: Getting Started
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE CAUTION: • The steamer and accessories get very hot during use, always allow them to cool down before handling. • Always unplug and switch off the steamer when assembling or disassembling. •... -
Page 10: Using Your Machine
Using your machine Filling the water tank IMPORTANT: Never turn the steamer over when water is in the tank, as some water may leak through the air valve. It is normal for the water tube to make a rattling sound inside the water tank during use. IMPORTANT: Always fi ll the clean water tank with WATER ONLY. - Page 11 Using your machine Cleaning hard fl oors IMPORTANT: Never use the steamer without a Microfi bre Pad attached to the fl oorhead. Never leave the steamer on one spot for an extended period of time or with a damp or wet Microfi bre Pad attached as this may damage the fl oor surface.
- Page 12 Using your machine Refreshing Carpets Twist the steam control Place the Microfi bre With Microfi bre Pad Plug into mains, turn dial dial to desired setting. Pad on the fl oor white attached, push to ‘ON’ position, the red Steam is activated side facing up.
- Page 13 Using your machine Using the machine as a handheld Push handle release button and Press accessory release button Push Concentration Nozzle into lift handle to remove. The collar and lift steamer to release fl oorhead. steamer until it clicks into place. should be gripped with one hand when releasing the handle with the other hand.
-
Page 14: Taking Care Of Your Machine
Taking care of your machine Emptying the water tank IMPORTANT: Don’t use bleach or fabric softener when washing the Microfi bre Pad. Always allow the steamer to fully cool down before removing the Microfi bre Pad. IMPORTANT: Never remove the water tank cap with the product upright as water could leak out–always remove the fl oorhead and handle and place on a fl at surface before removing the water tank cap. -
Page 15: Clearing Blockages
Taking care of your machine Clearing blockages IMPORTANT: Turn dial on steamer to ‘OFF’ position, switch off at mains and unplug safely. Allow to fully cool down before performing maintenance or troubleshooting checks. Push the accessory fl oorhead Use a small thin object such as a To clear a blockage in the release button and lift the paperclip to insert into the nozzle... -
Page 16: Troubleshooting
• If it is missing, we’re here to help. Simply call us on accessory missing. AUS: 1300 VAX AUS (1300 829 287) NZ: 0800 VAX NZL (0800 829 695) • Check the on/off control dial position. - Page 17 Getting in touch * Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
- Page 18 Notes...
- Page 19 Notes...
- Page 20 Distributed by Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149, Melbourne, Australia Careline AU: 1300 VAX AUS (1300 829 287) www.vax.com.au Techtronic Industries N.Z. Limited 2 Landing Drive, Mangere, Auckland, 2022, New Zealand Careline NZ: 0800 VAX NZL (0800 829 695) www.vax.co.nz...
Need help?
Do you have a question about the VX69 and is the answer not in the manual?
Questions and answers