Vax VCSD-03 User Manual page 14

FAQs
Why does the VCSD-03 have no power?
• Check the fuse in the charger plug. Always replace the fuse in the plug with a British 3 Amp fuse.
• The battery may not be charged. Remove and charge the battery.
Why won't the VCSD-03 pick up?
• The dirty water tank has an automatic shut off to prevent the tank from overflowing. If this is activated,
the machine will not pick up and the sound of the motor will change. The dirty water tank will need to
be emptied.
• The nozzle may be blocked. Remove the nozzle and clean thorougly.
Why won't water/detergent dispense?
• The clean water tank may not be locked into position.
• Ensure the clean water tank is filled correctly.
• The clean water tank may be empty and need to be refilled.
Why won't the brushes spin?
• Check that the SpinScrub™ brushes are clear of blockages.
Why isn't the battery charger light lit when the battery is charging?
• Check the battery charger is plugged in and switched on at the mains.
• Check the battery is inserted correctly into the charger.
• The battery may not be connecting with the charger. Remove the battery and unplug charger,
wait 10 seconds then retry.
Why is the battery charger light continually flashing?
• Check the battery is inserted correctly into the charger.
• The battery or charger has an error. Remove the battery and unplug charger, wait 10 seconds
then plug charger into socket and re-insert the battery.
• Check terminals on battery and VCSD-03 are clean.
14
VCSD-03_HardFloor_Commercial_UG_[VAX001553]_PRINT_261114.indd 14
vaxcommercial.co.uk
27/11/2014 08:32