Troubleshooting - Garmin iQue M5 Application Manual

Troubleshooting

If you have trouble initializing your iQue M5, try these
tips and suggestions:
• Make sure the GPS antenna is raised and is
parallel to the horizon.
• Make sure you are in an open area that is
unobstructed by tall buildings or trees.
• Make sure you have given the iQue M5 enough
time to initialize: it may take several minutes.
• Try turning the iQue M5 off and then back on.
• If you have moved a long distance since you last
used the iQue M5, or if initializing takes a long
time, use the QueGPS
location, as described below.
To change your location:
1. With the iQue M5 turned on and the GPS
antenna open, tap the System Status icon
at the top of the page.
2. Tap the GPS Status icon
Satellites") to open QueGPS.
3. Tap Menu. Then tap New Location.
iQue M5 Que Applications Guide
page to change your
™
("Acquiring
G S
ETTING TARTED
4. Use the Pan Toolbar at the top of the page to
find your approximate position on the map.
See "Using the Pan Toolbar,"
information.
5. Tap the map to place the map pointer at your
approximate position.
Tap to place the
map pointer
Tap to choose a
zoom scale
6. Tap Select.
NOTE: For more information about QueGPS,
refer to page 46.
> A S S
CQUIRING ATELLITE IGNALS
page 8, for more
Tap to draw zoom area. Tap
again to pan map.
3