Fcc Compliance - Garmin iQue M5 Application Manual

FCC Compliance

The iQue M5 complies with Part 15 of the FCC
interference limits for Class B digital devices FOR
HOME OR OFFICE USE. These limits are designed
to provide more reasonable protection against harmful
interference in a residential installation, and are more
stringent than "outdoor" requirements.
Operation of this device is subject to the following
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one of the following measures:
iQue M5 Que Applications Guide
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and the receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
The iQue M5 and its antenna(s) must not be co-located
or operated in conjunction with any other antenna or
transmitter.
The iQue M5 does not contain any user-serviceable
parts. Repairs should only be made by an authorized
Garmin service center. Unauthorized repairs or
modifications could result in permanent damage to the
equipment, and void your warranty and your authority
to operate this device under Part 15 regulations.
A > FCC C
PPENDIX OMPLIANCE
59