Garmin iQue M5 Application Manual page 55

5. Insert the iQue M5 into the Auto cradle by lining
up the sides of the unit with the sides of the
cradle. Then slide the unit gently down until it
clicks into place.
1 2
6. Loosen the adjustment knobs and re-position
the mount, if necessary, so that you can view
the iQue M5 easily. When you are finished
adjusting the mount, tighten the knobs firmly
and recheck the suction mount's firm hold.
iQue M5 Que Applications Guide
7. To remove the suction mount from the
windshield, lift the cam lever to release the
suction cup's grip. If necessary, pull upwards on
the tab on the button of the suction cup to help
release the grip.
The DC adapter contains an external speaker; adjust
the volume on the speaker to hear directions while
in your vehicle. The tip of the adapter contains an
AGC/3AG 1.5 amp, high-breaking capacity, 1500A-
rated fuse. If you need to replace it, simply unscrew
and remove the black, round end piece. Remove the
metal tip and then remove/replace the fuse with the
same type listed above.
Fuse (in tip
of adapter)
A > V I
PPENDIX EHICLE NSTALLATION
Speaker
Volume control
51