Introduction; Scope; Audience; Contact Information, Support - Teli LE910C1-NA Design Manual

LE910Cx HW User Guide

1. INTRODUCTION

Scope

This document introduces the Telit LE910Cx module and presents possible and
recommended hardware solutions for the development of a product based on this
module. All the features and solutions described in this document are applicable to all
LE910Cx variants listed in the applicability table.
If a specific feature is applicable to a specific product only, it will be clearly marked.
Note: LE910Cx refers to all modules listed in the Applicability Table
This document takes into account all the basic functions of a wireless module; it suggests
a valid hardware solution for each function and points out incorrect solutions and
common errors to be avoided.
This document cannot include every hardware solution or every product that can be
designed. Avoiding invalid solutions must be considered mandatory. Where the
suggested hardware configurations are not be considered mandatory, the information
provided should be used as a guide and a starting point for the proper development of
the product with the Telit LE910Cx module.
Note: The integration of the GSM/GPRS/EGPRS/WCDMA/HSPA+/LTE
LE910Cx cellular module within a user application must be done
according to the design rules described in this manual.

Audience

This document is intended for Telit customers, especially system integrators, about to
implement their applications using the Telit LE910Cx module.

Contact Information, Support

For general contact, technical support services, technical questions and report
documentation errors, contact Telit Technical Support at:
TS-EMEA@telit.com
•
TS-AMERICAS@telit.com
•
• TS-APAC@telit.com
1VV0301298 Rev. 33 Page 8 of 128
Not Subject to NDA
2021-06-29