Jtbl Regulatory Notices; Ncc Regulatory Notices - Teli LE910C1-NA Design Manual

LE910Cx HW User Guide
Contains IC: 5131A-LE910CXLA
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe B est conforme à la norme canadienne ICES-003.

JTBL Regulatory Notices

Antenna
According to Japan regulatory rule, module certification is valid only with the specific
antennas registered to and approved by JRL certified body in relation to module
certification. Customers who are going to use modules under Japan Radio Law, are
responsible to contact Telit technical support or sales to get the list of these antennas.
Dial Function
The JTBL Module Certification for "LE910C1-AP" is for "non-Auto Redial Function"
device.
In case customer implement "Auto Redial" function into Application Device by controlling
LE910C1-AP, the customer cannot utilize LE910C1-AP JTBL certification, and they must
apply JTBL as "Application Device" System.

NCC Regulatory Notices

According to NCC Taiwan requirements, the module and the packaging shall be identified
as described in the following lines. Shall be added also the specified safety warning
statement.
Brand name: Telit
Model name: LE910C1-AP
Product name: WWAN module
NCC logo:
NCC ID: CCAF19Z10050T8
NCC safety warning statement: "減少電磁波影響，請妥適使用"
1VV0301298 Rev. 33 Page 115 of 128
Not Subject to NDA
2021-06-29