Document History; Section 10.X - Dimension And Mechanical Design Updated - Teli LE910C1-NA Design Manual

Table of Contents

Advertisement

LE910Cx HW User Guide

16. DOCUMENT HISTORY

Revision
Date
33
2021-07-01
32
2021-03-23
31
2021-02-05
30
2021-01-29
29
2021-01-12
28
2020-12-08
27
2020-07-31
26
2020-07-22
25
2020-06-15
1VV0301298 Rev. 33
Section 1.5 – Updated Related Documents
Section 5.1 – Added flow chart for turn on and AT command managing procedure
Section 6.2 – Added note for eDRX
Section 8.6 – Update Audio Interface (ThreadX OS support PCM)
Section 10-3 - Recommended Footprint for the Application updated
for LE910Cx-WWX
Table 48: LE910Cx Current Consumption updated
Section 10.x – Dimension and Mechanical design updated
Section 5.3.3 – Fixed Typo in Note of Section.
Section 8.6 – Update PCM CLK rate.
Table 1: Applicability Table updated
Table4: RF Bands per Regional Variant updated
2.8.1 Dimensions updated
3.1 Note added
Section 2.3 – Added not supported function only based on TreadX OS models
Section 8.5.1 – Updated Note
Updated Section 8.6 – updated I2S diagram
Updated APPLICABILITY TABLE and added notes
Section 3.1 – Updated Pin-out
Section 5.2 – Updated Initialization and Activation figure and added timing table
Section 5.3 – Updated figures
Section 14.1 - Updated FCC/ISED Regulatory Notices
Updated Table 49: RF Bands per Regional Variant
Section 11.4 – Updated EMC Recommendations
7.4 Antenna Diversity Requirements – Note comment changed to AT#RXDIV
14.4 ANATEL Regulatory Notices - Updated
Section 8 – Hardware Interfaces; USB part updated
Section 8.1 – Note Updated
Table 45 and 4 - EUX variant added
Table 46 – CAT 4 DL/UL Tput swapped
Section 14.1 ANATEL Regulatory Notices – Homologation No. fixed
Section 2.7.1 Sensitivity – Sensitivity Table added
Section 2.2. Applications – E-call comment deleted
Page 122 of 128
Not Subject to NDA
Changes
2021-06-29

Advertisement

Table of Contents
loading

Table of Contents