Residual Risks; The Package Contains - Stanley SW75 Instruction Manual

ENGLISH (
Original Instructions)
Regularly clean the power tool's air vents. The
n.
motor's fan will draw the dust inside the housing and
excessive accumulation of powdered metal may cause
electrical hazards.
o.. Do not operate the power tool near flammable
materials. Sparks could ignitethese materials.
p. Do not use accessories that require liquid
coolants. Using water or other liquid coolants may
result in electrocution or shock.
Additional safety instructions for sanding
operations
Safety Warnings Specific for Sanding
Operations:
a. Do not use excessively oversized sanding disc paper.
Follow manufacturers recommendations, when selecting
sanding paper. Larger sanding paper extending beyond
the sanding pad presents a laceration hazard and may
cause snagging, tearing of the disc or kickback.
Additional Safety Information
WARNING: We recommend the use of a residual
current device with a residual current rating of
30mA or less.

RESIDUAL RISKS

Additional residual risks may arise when using the tool
which may not be included in the enclosed safety warnings.
These risks can arise from misuse, prolonged use etc. In
spite of the application of the relevant safety regulations and
the implementation of safety devices, certain risks cannot
be avoided. These are:
♦ Injuries caused by touching any rotating/moving parts.
♦ Injuries caused when changing any parts, blades or
accessories.
♦ Injuries caused by prolonged use of a tool. When using any
tool for prolonged periods ensure you take regular breaks.
♦ Impairment of hearing.
♦ Health hazards caused by breathing dust developed
when using your tool (example:- working with wood,
especially oak, beech and MDF.)
LABELS ON TOOL
The following symbols are shown on the tool along with date
code:
WARNING! To reduce the risk of injury, the user
must read the instruction manual before use.
Wear ear protection.
Wear safety glasses or goggles.
V Volts
A Amperes
22
Direct Current
n No-Load Speed
0
Hz Hertz
W Watts
min minutes
Alternating
Current
Position of Date Code (FIG. A)
The Date Code (10), which also includes the year of
manufacture, is printed into the housing.
Example:
2018 XX JN
Year of manufacturing

THE PACKAGE CONTAINS

1 Wall and ceiling sander
1 Instruction manual
1 Warranty card
1 Service center list
♦ Check for damage to the tool, parts or accessories
which may have occurred during transport.
♦ Take the time to thoroughly read and understand this
manual prior to operation.
DESCRIPTION (FIG. A to K)
WARNING: Never modify the power tool or any
part of it. Damage or personal injury could result
1 Round sanding head
2 Round sanding pad (hook & loop system)
3 Motor housing
4 Folding lock
5 Main handle
6 Shaft
7 On/ Off switch
8 Electronic speed control wheel
9 Dust extration outlet(with locking sleeve)
10 Extension shaft
1 Rear handle
2 Dust extraction outlet (with locking sleeve)
3 Sleeve
11 Vacuum hose
1 Support adaptor
2 Connector(pre-assembled)(38mm)
3 Suction power adjustment ring
4 Vacuum adaptor(pre-assembled)(47mm)
12 Vacuum adaptor(pre-assembled)(35mm)
13 Hex wrench S5
14 Round sanding disc
Class II Construction
Earthing Terminal
Safety Alert Symbol
Revolutions or
/min. Reciprocation per
minute