Transport Mode; Adblue Reset (Diesel Engine Exhaust Gas Filter); X Sensor Reset; Stop/Start Reset - Launch X-431 PAD V User Manual

Hide thumbs Also See for X-431 PAD V:

Table of Contents

LAUNCH

6.23 Transport Mode

In order to reduce power consumption, the following functions may be disabled,

including limiting the vehicle speed, not waking up the door opening network,

and disabling the remote control key, etc. At this time, the transport mode needs

to be deactivated to restore the vehicle to normal.

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea

reset operation is required.

6.25 NOx Sensor Reset

NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in

engine exhaust. If the NOx fault is re-initialized and the NOx catalytic converter

is replaced, it is necessary to reset the catalytic converter learned value stored

in the engine ECU.

This function is used to open or close the automatic start-stop function via

setting the hidden function in ECU (provided that the vehicle has a hidden

function and supported by hardware).

X-431 PAD V User Manual

Table of Contents