Riello ER Series Installation, Use And Maintenance Instructions page 35

3
Installation
3.1 Installation positions
The burner is available in various models to be installed with the air intake from below or above and from the left and from the right.
3.2 Boiler fixing
The two drawings show how to apply the burner to a burner of the water pipe type with a burner hole in the refractory material.
Fig. 9
3.3 Lifting points
To move the burner, the attachment points
indicated in Fig. 10 should be used.
Point (A) refers to the possibility of fixing the
eyebolts in the hols on the air flange.
Burner
ER 12 LSE
20074580
20075278
X Y Z
75 620 40
Fig. 10
9