Table of Contents
Advertisement
a D:GROUP Company
11 TRANSPORT, PACKING and STORAGE INSTRUCTIONS
IMPORTANT: Disconnect the power and sterilize the unit before performing any of the following
operations
The following instructions are essential if the end user needs to transport, pack or store a cabinet after a
period of routine use (e.g. laboratory/plant relocation):
-
Disconnect tubes for gas/vacuum (if present)
-
If the cabinet exhausts to the outside of the building or is connected to the intake channel of the air
treatment system, remove the connection tube from the cabinet to the outside or cabinet to the air
treatment system. Be careful not to damage or cover with dust (or any other material) the exhaust duct of
the cabinet
-
Remove the work surface and cover it with a protective film
-
Close the cabinet front opening using the closing/sterilizing panel and open the two latches of the front
safety glass
-
If the cabinet is to be moved from one laboratory to another within the same building by a forklift: put the
cabinet on a pallet to ensure good stability and to protect the lower part of the cabinet and the front/side
glasses against damage in transport.
-
Take care not to damage protruding parts (e.g.: key switch, gas/vacuum taps, exhaust duct) when
passing through doors/windows
-
If the cabinet is be kept temporarily unused at final destination ,cover the cabinet itself with a protective
film (pluriball or expansible film) taking care to protect also the exhaust duct, especially from dust
We recommend extreme caution in long-distance moving carried out by forwarding agents (e.g. change of
address): we suggest that you use the original packaging supplied by the manufacturer with the cabinet.
Packaging characteristics:
-
Wooden pallets of the following dimensions:
CytoFAST Top 209 : 113 x 90 x 12 cm
CytoFAST Top 212: 145 x 90 x 12 cm
CytoFAST Top 215: 175 x 90 x 12 cm
CytoFAST Top 218: 205 x 90 x 12 cm
-
Cardboard base to be laid on the pallet of the following dimensions:
CytoFAST Top 209:
CytoFAST Top 212:
CytoFAST Top 215:
CytoFAST Top 218:
-
Pluriball to wrap and protect the cabinet from dust
-
Cardboard outer package of the following dimension:
CytoFAST Top 209: 111 x 90 x 225 cm (1 cm thick)
CytoFAST Top 212: 147 x 90 x 225 cm (1 cm thick)
CytoFAST Top 215: 175 x 90 x 225 cm (1 cm thick)
CytoFAST Top 218: 206 x 90 x 225 cm (1 cm thick)
-
Steel straps and clips
During transport take care to maintain the package in a vertical position (i.e. the pallet at the bottom).
The cabinet (with or without the package) must be kept in a place with the following environmental conditions:
-
Min. temperature:
-
Max. temperature:
-
Max. humidity:
00055EN Rev.10 – 12/2011
110 x 87 x 1 cm
142 x 87 x 1 cm
172 x 87 x 1 cm
202 x 87 x 1 cm
0° C
70° C
90%
34
Advertisement
Table of Contents
