Molecular Devices SpectraMax iD3 User Manual page 6

SpectraMax iD3 Multi-Mode Microplate Reader User Guide
Symbols on the Instrument
Each safety label on the instrument contains an alert symbol that indicates the type of potential
safety hazard.
Symbol
Near-field Communication
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at their own expense. Changes or modifications made to this equipment not expressly
approved by the party responsible for compliance may void the FCC authorization to operate
this equipment.
6
Indication
Consult the product documentation.
Potential lifting hazard. To prevent injury, use a minimum of two people to lift the
instrument.
Potential pinch hazard.
Potential biohazard.
Potential heat hazard.
Electrostatic sensitive device (ESD). Observe precautions to handle electrostatic
sensitive devices.
Potential laser hazard. The instrument is rated a Class 1 Laser Product because it can use
an optional read module that contains a laser. The laser light cannot be accessed.
5054747 H